Port reference › Media & games
Port 5060 · SIP
VoIP call signaling
TCP/UDP Media & games Exposure risk: High
What is port 5060 used for?
SIP signaling for internet phone calls. The audio itself flows over RTP on a separate port range. TLS uses 5061.
Registered port (1024-49151): the range used by ordinary applications.
Security notes
Stolen SIP accounts are used for expensive international call fraud. Use strong passwords and block destination countries you do not need.
Allow port 5060 through the firewall
This port is risky to expose, so the commands below allow only the IPs you specify.
# Replace 203.0.113.10/32 with the IP or network you want to allow
sudo ufw allow from 203.0.113.10/32 to any port 5060 proto tcp
sudo ufw allow from 203.0.113.10/32 to any port 5060 proto udp
sudo ufw status # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="203.0.113.10/32" port port="5060" protocol="tcp" accept'
sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="203.0.113.10/32" port port="5060" protocol="udp" accept'
sudo firewall-cmd --reload # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo iptables -A INPUT -p tcp -s 203.0.113.10/32 --dport 5060 -j ACCEPT
sudo iptables -A INPUT -p udp -s 203.0.113.10/32 --dport 5060 -j ACCEPT # Replace 203.0.113.10/32 with the IP or network you want to allow
New-NetFirewallRule -DisplayName "Allow TCP 5060" -Direction Inbound -Protocol TCP -LocalPort 5060 -RemoteAddress 203.0.113.10/32 -Action Allow
New-NetFirewallRule -DisplayName "Allow UDP 5060" -Direction Inbound -Protocol UDP -LocalPort 5060 -RemoteAddress 203.0.113.10/32 -Action Allow # Replace sg-0123456789abcdef0 with your security group ID
aws ec2 authorize-security-group-ingress --group-id sg-0123456789abcdef0 --protocol tcp --port 5060 --cidr 203.0.113.10/32
aws ec2 authorize-security-group-ingress --group-id sg-0123456789abcdef0 --protocol udp --port 5060 --cidr 203.0.113.10/32 Check whether port 5060 is open
sudo ss -tulpn | grep ':5060 ' netstat -ano | findstr :5060 nc -zv SERVER 5060
# Windows
Test-NetConnection SERVER -Port 5060 sudo lsof -i :5060 Ports used together
- 5061 SIP over TLS · Encrypted SIP
- 3478 STUN / TURN · WebRTC and video call NAT traversal