Port reference › File sharing
Port 69 · TFTP
Device firmware and config transfer
UDP File sharing Exposure risk: High
What is port 69 used for?
A trivial file transfer protocol with no authentication. Used for network device firmware upgrades, config backups and PXE boot.
Well-known port (0-1023): opening it on Linux needs root (or CAP_NET_BIND_SERVICE).
Security notes
There is no authentication at all. Turn it on only while working, inside the management network. Leaked device configs expose password hashes.
Allow port 69 through the firewall
This port is risky to expose, so the commands below allow only the IPs you specify.
# Replace 203.0.113.10/32 with the IP or network you want to allow
sudo ufw allow from 203.0.113.10/32 to any port 69 proto udp
sudo ufw status # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="203.0.113.10/32" port port="69" protocol="udp" accept'
sudo firewall-cmd --reload # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo iptables -A INPUT -p udp -s 203.0.113.10/32 --dport 69 -j ACCEPT # Replace 203.0.113.10/32 with the IP or network you want to allow
New-NetFirewallRule -DisplayName "Allow UDP 69" -Direction Inbound -Protocol UDP -LocalPort 69 -RemoteAddress 203.0.113.10/32 -Action Allow # Replace sg-0123456789abcdef0 with your security group ID
aws ec2 authorize-security-group-ingress --group-id sg-0123456789abcdef0 --protocol udp --port 69 --cidr 203.0.113.10/32 Check whether port 69 is open
sudo ss -ulpn | grep ':69 ' netstat -ano | findstr :69 nc -zuv SERVER 69
# UDP can look "open" even with no reply, so do not trust this alone.
# Testing with a real client for the service is more reliable. sudo lsof -i :69