Port reference › VPN
Port 4500 · IPsec NAT-T
IPsec through NAT
UDP VPN Exposure risk: Medium
What is port 4500 used for?
NAT Traversal port that wraps IPsec in UDP. If a VPN behind a router connects but passes no traffic, check this port.
Registered port (1024-49151): the range used by ordinary applications.
Security notes
Allowing only VPN peer IPs is ideal.
Allow port 4500 through the firewall
This port is risky to expose, so the commands below allow only the IPs you specify.
# Replace 203.0.113.10/32 with the IP or network you want to allow
sudo ufw allow from 203.0.113.10/32 to any port 4500 proto udp
sudo ufw status # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="203.0.113.10/32" port port="4500" protocol="udp" accept'
sudo firewall-cmd --reload # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo iptables -A INPUT -p udp -s 203.0.113.10/32 --dport 4500 -j ACCEPT # Replace 203.0.113.10/32 with the IP or network you want to allow
New-NetFirewallRule -DisplayName "Allow UDP 4500" -Direction Inbound -Protocol UDP -LocalPort 4500 -RemoteAddress 203.0.113.10/32 -Action Allow # Replace sg-0123456789abcdef0 with your security group ID
aws ec2 authorize-security-group-ingress --group-id sg-0123456789abcdef0 --protocol udp --port 4500 --cidr 203.0.113.10/32 Check whether port 4500 is open
sudo ss -ulpn | grep ':4500 ' netstat -ano | findstr :4500 nc -zuv SERVER 4500
# UDP can look "open" even with no reply, so do not trust this alone.
# Testing with a real client for the service is more reliable. sudo lsof -i :4500 Ports used together
- 500 IKE (IPsec) · IPsec VPN key exchange