Port reference › VPN
Port 500 · IKE (IPsec)
IPsec VPN key exchange
UDP VPN Exposure risk: Medium
What is port 500 used for?
IKE key exchange for IPsec VPNs, including site-to-site tunnels and AWS or Azure VPN gateways. Behind NAT, 4500 is used as well.
Well-known port (0-1023): opening it on Linux needs root (or CAP_NET_BIND_SERVICE).
Security notes
Avoid IKEv1 Aggressive Mode and weak ciphers (3DES, DH group 2).
Allow port 500 through the firewall
This port is risky to expose, so the commands below allow only the IPs you specify.
# Replace 203.0.113.10/32 with the IP or network you want to allow
sudo ufw allow from 203.0.113.10/32 to any port 500 proto udp
sudo ufw status # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="203.0.113.10/32" port port="500" protocol="udp" accept'
sudo firewall-cmd --reload # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo iptables -A INPUT -p udp -s 203.0.113.10/32 --dport 500 -j ACCEPT # Replace 203.0.113.10/32 with the IP or network you want to allow
New-NetFirewallRule -DisplayName "Allow UDP 500" -Direction Inbound -Protocol UDP -LocalPort 500 -RemoteAddress 203.0.113.10/32 -Action Allow # Replace sg-0123456789abcdef0 with your security group ID
aws ec2 authorize-security-group-ingress --group-id sg-0123456789abcdef0 --protocol udp --port 500 --cidr 203.0.113.10/32 Check whether port 500 is open
sudo ss -ulpn | grep ':500 ' netstat -ano | findstr :500 nc -zuv SERVER 500
# UDP can look "open" even with no reply, so do not trust this alone.
# Testing with a real client for the service is more reliable. sudo lsof -i :500 Ports used together
- 4500 IPsec NAT-T · IPsec through NAT