Port reference › Network infrastructure

Port 123 · NTP

Time synchronization

UDP Network infrastructure Exposure risk: Medium

What is port 123 used for?

NTP keeps server and device clocks in sync. Certificate checks, log analysis and Kerberos all depend on accurate time.

Well-known port (0-1023): opening it on Linux needs root (or CAP_NET_BIND_SERVICE).

Security notes

The old monlist command is abused for DDoS amplification. Run current versions and limit external queries.

Allow port 123 through the firewall

This port is risky to expose, so the commands below allow only the IPs you specify.

# Replace 203.0.113.10/32 with the IP or network you want to allow
sudo ufw allow from 203.0.113.10/32 to any port 123 proto udp
sudo ufw status

Check whether port 123 is open

sudo ss -ulpn | grep ':123 '

Other network infrastructure ports

53 DNS 853 DNS over TLS 67 DHCP server 68 DHCP client 161 SNMP 162 SNMP trap 179 BGP 514 Syslog 830 NETCONF 4789 VXLAN 5353 mDNS