Port reference › Network infrastructure
Port 830 · NETCONF
Network device config automation
TCP Network infrastructure Exposure risk: Medium
What is port 830 used for?
NETCONF over SSH. Reads and changes device configuration using YANG models; used by Ansible, ncclient and NSO.
Well-known port (0-1023): opening it on Linux needs root (or CAP_NET_BIND_SERVICE).
Security notes
It can change device configuration — allow only automation server IPs.
Allow port 830 through the firewall
This port is risky to expose, so the commands below allow only the IPs you specify.
# Replace 203.0.113.10/32 with the IP or network you want to allow
sudo ufw allow from 203.0.113.10/32 to any port 830 proto tcp
sudo ufw status # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="203.0.113.10/32" port port="830" protocol="tcp" accept'
sudo firewall-cmd --reload # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo iptables -A INPUT -p tcp -s 203.0.113.10/32 --dport 830 -j ACCEPT # Replace 203.0.113.10/32 with the IP or network you want to allow
New-NetFirewallRule -DisplayName "Allow TCP 830" -Direction Inbound -Protocol TCP -LocalPort 830 -RemoteAddress 203.0.113.10/32 -Action Allow # Replace sg-0123456789abcdef0 with your security group ID
aws ec2 authorize-security-group-ingress --group-id sg-0123456789abcdef0 --protocol tcp --port 830 --cidr 203.0.113.10/32 Check whether port 830 is open
sudo ss -tlpn | grep ':830 ' netstat -ano | findstr :830 nc -zv SERVER 830
# Windows
Test-NetConnection SERVER -Port 830 sudo lsof -i :830