Port reference › Network infrastructure
Port 179 · BGP
Route exchange between routers
TCP Network infrastructure Exposure risk: Medium
What is port 179 used for?
BGP, for routers exchanging routes. Used on internet backbones, in data centers and by Kubernetes Calico or MetalLB in BGP mode.
Well-known port (0-1023): opening it on Linux needs root (or CAP_NET_BIND_SERVICE).
Security notes
Allow only peer IPs and use MD5 or TCP-AO authentication. Bad route announcements cause large outages.
Allow port 179 through the firewall
This port is risky to expose, so the commands below allow only the IPs you specify.
# Replace 203.0.113.10/32 with the IP or network you want to allow
sudo ufw allow from 203.0.113.10/32 to any port 179 proto tcp
sudo ufw status # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="203.0.113.10/32" port port="179" protocol="tcp" accept'
sudo firewall-cmd --reload # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo iptables -A INPUT -p tcp -s 203.0.113.10/32 --dport 179 -j ACCEPT # Replace 203.0.113.10/32 with the IP or network you want to allow
New-NetFirewallRule -DisplayName "Allow TCP 179" -Direction Inbound -Protocol TCP -LocalPort 179 -RemoteAddress 203.0.113.10/32 -Action Allow # Replace sg-0123456789abcdef0 with your security group ID
aws ec2 authorize-security-group-ingress --group-id sg-0123456789abcdef0 --protocol tcp --port 179 --cidr 203.0.113.10/32 Check whether port 179 is open
sudo ss -tlpn | grep ':179 ' netstat -ano | findstr :179 nc -zv SERVER 179
# Windows
Test-NetConnection SERVER -Port 179 sudo lsof -i :179