Port reference › Network infrastructure
Port 162 · SNMP trap
Device alert receiver
UDP Network infrastructure Exposure risk: Medium
What is port 162 used for?
Port where an NMS receives SNMP traps (faults and events) sent by devices.
Well-known port (0-1023): opening it on Linux needs root (or CAP_NET_BIND_SERVICE).
Security notes
Accept traps only from managed device networks.
Allow port 162 through the firewall
This port is risky to expose, so the commands below allow only the IPs you specify.
# Replace 203.0.113.10/32 with the IP or network you want to allow
sudo ufw allow from 203.0.113.10/32 to any port 162 proto udp
sudo ufw status # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="203.0.113.10/32" port port="162" protocol="udp" accept'
sudo firewall-cmd --reload # Replace 203.0.113.10/32 with the IP or network you want to allow
sudo iptables -A INPUT -p udp -s 203.0.113.10/32 --dport 162 -j ACCEPT # Replace 203.0.113.10/32 with the IP or network you want to allow
New-NetFirewallRule -DisplayName "Allow UDP 162" -Direction Inbound -Protocol UDP -LocalPort 162 -RemoteAddress 203.0.113.10/32 -Action Allow # Replace sg-0123456789abcdef0 with your security group ID
aws ec2 authorize-security-group-ingress --group-id sg-0123456789abcdef0 --protocol udp --port 162 --cidr 203.0.113.10/32 Check whether port 162 is open
sudo ss -ulpn | grep ':162 ' netstat -ano | findstr :162 nc -zuv SERVER 162
# UDP can look "open" even with no reply, so do not trust this alone.
# Testing with a real client for the service is more reliable. sudo lsof -i :162 Ports used together
- 161 SNMP · Network device monitoring